Chiller's HYbrid Cooled SR-2

Forum OvercleX

#1 2011-02-01 21:54:55

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Chiller's HYbrid Cooled SR-2

This build is made possible by and  thanks to Aquatuning

http://www.aquatuning.de/bilder/banner/468x60_eng.gif

Xtreme Case Mods

http://i56.tinypic.com/2ijmfky.jpg

IT-Service

http://i56.tinypic.com/14w6oli.jpg

Cooler Master

http://i55.tinypic.com/302p7bq.jpg

Zetix

http://i56.tinypic.com/2qnd0ux.jpg


what i make from this :

http://i38.tinypic.com/2i9kr6c.jpg

i made this :

http://i36.tinypic.com/11m9ftw.jpg
http://i35.tinypic.com/2rc3hqb.jpg
http://i37.tinypic.com/1zq7ces.jpg
http://i33.tinypic.com/152jhv6.jpg

and now i'm building the cooling in it, it looks like this how it is now :

I was in hospital for 1 month, and long time sick home, but now i am busy again on the mod :

http://i45.tinypic.com/27y5ugj.jpg

http://i30.tinypic.com/33p4jm8.jpg
http://i31.tinypic.com/2uzyqrp.jpg

http://i25.tinypic.com/4ibz4j.jpg

Boreas chiller :

http://i27.tinypic.com/2mq517n.jpg
http://i30.tinypic.com/124h9pu.jpg
http://i28.tinypic.com/1y5lza.jpg

http://i25.tinypic.com/2v0lqpc.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i30.tinypic.com/23wwv1f.jpg

http://i26.tinypic.com/2cqjne8.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i25.tinypic.com/2z9csxv.jpg

http://i28.tinypic.com/8ql4.jpg

http://i45.tinypic.com/27y5ugj.jpg

[ram]http://www.youtube.com/watch?v=tg4mQPt8K-E[/ram]

http://i31.tinypic.com/sxi0zb.jpg
http://i28.tinypic.com/se8tjb.jpg

http://i29.tinypic.com/21bu986.jpg
http://i29.tinypic.com/34parg2.jpg


http://i45.tinypic.com/27y5ugj.jpg

http://i26.tinypic.com/34zy8ec.jpg

http://i26.tinypic.com/2ed5rug.jpg

http://i32.tinypic.com/2ibkt1i.jpg

http://i32.tinypic.com/148hgro.jpg

http://i31.tinypic.com/jg5buq.jpg

[ram]http://www.youtube.com/watch?v=W472AlaLsbA[/ram]

today only change the power for the led's in the Corsair HX1000 psu what i made see tru,
and put the first led's in the 5mm fan shroud for the boreas chiller :

PSU
http://i37.tinypic.com/13ypl4y.jpg
http://i37.tinypic.com/34i5szr.jpg

De Boreas Chiller :
http://i37.tinypic.com/30mmq8h.jpg
http://i38.tinypic.com/e8scxs.jpg

http://i38.tinypic.com/2yxgh3m.jpg
http://i36.tinypic.com/2d8qo9y.jpg
http://i38.tinypic.com/1588e3k.jpg

http://i45.tinypic.com/27y5ugj.jpg

today received 3 packages, so work again on the parts and case, the boreas chiller is finished, no to the Freezone Elite and Freezone V1. :

new TEC plates in tha house, so now i can finish the Freezone V1 cooler :
http://i36.tinypic.com/efgld2.jpg
http://i34.tinypic.com/5nqky8.jpg
http://i33.tinypic.com/t657pv.jpg

the psu painting in black , de thermaltake for the TEC's :

http://i34.tinypic.com/5ufznb.jpg
http://i34.tinypic.com/a9pbpf.jpg

http://i45.tinypic.com/27y5ugj.jpg

the Coolit Boreas is finished, now the dual bay psu and the rest of coolers :

http://i38.tinypic.com/8y6opl.jpg
http://i37.tinypic.com/f57uy8.jpg
http://i37.tinypic.com/2ihw7yx.jpg
http://i36.tinypic.com/14brte9.jpg

De thermaltake dual bay psu is also finished, pianted outside black, and inside silver for putting the light nice out,
only the psu front i need to put back :

http://i33.tinypic.com/2vimssi.jpg

painted because it looked like this in gold  :

http://i35.tinypic.com/33p3nr9.jpg

video

http://www.youtube.com/watch?v=VThbPrN9UPI

http://i45.tinypic.com/27y5ugj.jpg

Koolance TMS-200 with expansion board modding :

http://i36.tinypic.com/5xiy3n.jpg
http://i36.tinypic.com/23j63nr.jpg
http://i38.tinypic.com/wlw4xv.jpg

I got some connector to short, need to order more

http://i34.tinypic.com/230101.jpg

i customized the 3D fangrill so it fits on my Coolit Boreas Chiller :

This was how it looks standard :

http://i36.tinypic.com/2n0ltuq.jpg

And after the adjustment, who see the difference ???? lol   :tong:

http://i35.tinypic.com/w9f8qp.jpg
http://i35.tinypic.com/1zqvg3s.jpg

And this is how it going to fit in black and red on the Chiller :

http://i38.tinypic.com/rif8zb.jpg
http://i37.tinypic.com/op6wph.jpg

http://i45.tinypic.com/27y5ugj.jpg

Mounting for the Boreas Chiller made, was first the HDD trays.
Now made mat black acryl with behind the mounting plates for the boreas chiller.
And still need to finish it nice off and put holes for the cables of the boreas :

http://i52.tinypic.com/2ec3zba.jpg
http://i51.tinypic.com/2ns5g2g.jpg
http://i56.tinypic.com/1z6ckmh.jpg

this is the difference of size between my old skulltrail (intel skulltrail D5400XS) and my current new one SR-2 5520 :

http://i56.tinypic.com/15632gi.jpg
http://i51.tinypic.com/s4mkrb.jpg

Now i made new holes for the motherboard spacers, and put tread in it for the spacers :
All nessesairy screws of the motherboard just fit nicely on the tray :
now only need the dangerden 10 PciE slot IO-shield :

http://i52.tinypic.com/2a9ze36.jpg

And changing the backplates to for the Koolanc 360 blocks on cpu's :

http://i52.tinypic.com/316kr5z.jpg

http://i55.tinypic.com/2rohoap.jpg

http://i55.tinypic.com/2rqim9f.jpg

http://i53.tinypic.com/154a6uq.jpg

Here's the 3d fan grill in primer with the adjustments for a little more airflow, ready to sand again :

http://i54.tinypic.com/2q0u77r.jpg

http://i45.tinypic.com/27y5ugj.jpg

the mounting for the Boreas chiller is ready exept for the holes to put the wires and tubing tru :

http://i55.tinypic.com/106gep5.jpg

fan grill got it first paint job , is get dry now :

http://i55.tinypic.com/2ia3ddj.jpg

and the front plate for the drive bays has a primer :

http://i54.tinypic.com/2n8wu9y.jpg

and first paint job in mat black (just fresh, needs to dry) :

http://i55.tinypic.com/6zr2wi.jpg

http://i45.tinypic.com/27y5ugj.jpg

Little update,

Coolit Freezone Elite is ready to and cpu's are on the mobo ,

And here are some pics of the total view :

http://i55.tinypic.com/nccies.jpg
http://i53.tinypic.com/4hwh6o.jpg
http://i51.tinypic.com/2nq4k8y.jpg
http://i55.tinypic.com/24osj8l.jpg

http://www.youtube.com/watch?v=bggiAcJvV2I

http://i54.tinypic.com/x4os4.jpg

allmost finished, just have to make it nice :

http://i52.tinypic.com/6z5x80.jpg
http://i51.tinypic.com/b7maea.jpg
http://i55.tinypic.com/n34xe1.jpg
http://i55.tinypic.com/2q1urs4.jpg
http://i52.tinypic.com/sp90tx.jpg

http://i45.tinypic.com/27y5ugj.jpg

Two Koolance 360 rev1.1 , and Koolance SR-2 Classified full cover block are arrived :

http://i54.tinypic.com/33ud4it.jpg
http://i54.tinypic.com/2ly64ap.jpg

after received it, let's open up the full cover block SR-2 and change it a little bit :

http://i53.tinypic.com/2gv6bye.jpg

a lot of sanding it to get the nickel of it, and then the first layer of primer :

http://i53.tinypic.com/21k9mr4.jpg
http://i56.tinypic.com/10idipw.jpg

http://i45.tinypic.com/27y5ugj.jpg

first layer mat black is on, tomorrow sanding it and paint it the last time for finishing touch,
after when it's dry mount the block again and put it on the motherboard :

http://i52.tinypic.com/6pymfn.jpg
http://i55.tinypic.com/zjzb4i.jpg
http://i54.tinypic.com/2ze9fee.jpg

http://i45.tinypic.com/27y5ugj.jpg

SR-2 full cover block is ready and mounted :

http://i55.tinypic.com/dq5e1j.jpg
http://i54.tinypic.com/14dd72e.jpg
http://i52.tinypic.com/5xk01c.jpg
http://i55.tinypic.com/2d7ikpy.jpg

from this :

http://i51.tinypic.com/2ntbxwl.jpg

i made these, and a little bit more, only waiting for a new shipment of red connectors :

http://i55.tinypic.com/20r8dxz.jpg

http://i45.tinypic.com/27y5ugj.jpg

i used these ones :

http://i52.tinypic.com/70ciz7.jpg

And cut them smaller :

http://i53.tinypic.com/w0osw5.jpg

And use heatshrink to make the Black line on it :

http://i53.tinypic.com/2utjn1w.jpg

The other cpu his power cable is also done, and the PciE cable also :

http://i52.tinypic.com/11c48sp.jpg
http://i52.tinypic.com/211qye1.jpg
http://i51.tinypic.com/2nkub01.jpg

Total overview of the powercables on the motherboard, the green circle is where the cables leave the case to the other side for connection to the powersupply :

http://i56.tinypic.com/adyh61.jpg

new parts in :

Evga SR-2 1200w psu

http://i55.tinypic.com/24phw0z.jpg
http://i54.tinypic.com/ayqzv4.jpg

PciE connector for GPU's with a 2200UF (MicroFarad) condensator and ferrit-cores :

http://i53.tinypic.com/33d9jqe.jpg

Cpu ATX power connectors, also with 2200UF (microFarad) Condensator and ferrit-cores :

http://i56.tinypic.com/20j304i.jpg

and te best part of the power supply is on the back of it lol :

http://i54.tinypic.com/24edx74.jpg

Also LGA1156 socket isolation and new inox Backplates for my SR-2 :

http://i53.tinypic.com/25f57i0.jpg

also i got two red displays in for on my controller.
To swat the green light lcd out for a red symbol / black background display  :

http://i55.tinypic.com/jtw040.jpg

http://i45.tinypic.com/27y5ugj.jpg

take a HB624 controller with ALMEGA88V chip  :

http://i51.tinypic.com/5wyo38.jpg

put some cables and a  pot meter on it :

http://i53.tinypic.com/ebehad.jpg

with the pot meter 10K i can adkust the screen light :

To see real time the 12v rail of the SR-2 powersupply, and monitore the power drawn of the three coolit coolers :

http://i54.tinypic.com/24vk7so.jpg
http://i56.tinypic.com/r91zy9.jpg

cpu disable jumpers soldered for make the connector for it in front of the case :

http://i55.tinypic.com/2ytwqo8.jpg

need to cut new Socket isolation because SR-2 has no big condensators next to the sockets, so i can use some more isolation : :

http://i54.tinypic.com/2igiueu.jpg

putted also three temp sensors under the full cover blok, to measure the CPU PWM 1 en 2 and the NB temp
with a Koolanc TMS-200 controller :

http://i56.tinypic.com/1znxsog.jpg
http://i56.tinypic.com/r0ytcm.jpg
http://i53.tinypic.com/293ex6s.jpg

total overview of the mobo in current state:

http://i54.tinypic.com/10pc3th.jpg

http://i45.tinypic.com/27y5ugj.jpg

today little testing en measurement, the boreas chiller and the freezone will be hanged on the power use controller.
http://i52.tinypic.com/2eoihi0.jpg

but a lot of cables here that needs to be in the case fitted.

http://i51.tinypic.com/2898nkm.jpg

http://i45.tinypic.com/27y5ugj.jpg

Alu plaat of 1.5mm is in, tomorrow making the adjustment of the  mobo cover :

http://i51.tinypic.com/m4qxj.jpg

http://i45.tinypic.com/27y5ugj.jpg

Today being busy with making place for all the usb cables, power led, hdd led etc to go away from mobo as fast as possible, not to show to much cables in case.
Also adjusting some things to get the mobo cover enlargement fitted on case,
used a lot of dremel cutting disks :

http://i51.tinypic.com/34qpv2h.jpg

And because the Evga SR-2 mobo doesn't have condensators like a normal LGA1366 mobo around the socket, i needed to make some new socket isolation kits for around cpu with more amramflex, pictures will say enough :

http://i54.tinypic.com/2igiueu.jpg

And here you see the normal cut-out of a lga1366 socket kit and that for a Evga SR-2 mobo :

http://i54.tinypic.com/20p5v08.jpg

just bended the alu plate in the same curve as the standard mobo cover also have :

http://i53.tinypic.com/qx2xxz.jpg

The curve in the red circle, the green lines is untill where the mobo cover needs to get bigger for the bigger mobo :

http://i54.tinypic.com/fxxjxi.jpg

http://i45.tinypic.com/27y5ugj.jpg

The original mobo cover has a serious cut-out for the adjustment,
and you see the four square holes for mounting the new alu plate :

http://i56.tinypic.com/wc0far.jpg

This is the bottom of the original mobo cover, is a serious cut-out on,
so Quad sli GTX480 still fitts :

http://i56.tinypic.com/2m5xdmv.jpg

The new alu plate working on :

http://i53.tinypic.com/28tuxl5.jpg

And here it's fitted on the case base plate :

http://i55.tinypic.com/wqzjag.jpg

Nice fit :

http://i52.tinypic.com/wbt9nm.jpg

And with the base plate of the big Boreas Chiller,
you see that the ATX 24pin needs a cut-out, and two tubing with a BP fitting,
also the Coolit Freezone V1 needs his place in this plate :

http://i51.tinypic.com/2e0mget.jpg
http://i51.tinypic.com/2j47uia.jpg

And here you see what also needs to be cutt-out in alu plate :

http://i54.tinypic.com/29m8xhz.jpg

also with very small iron files i have to make the honey roster on another place :

http://i56.tinypic.com/15d8f94.jpg

Update after some hours work :

the BP fittings are in place also the cutt-out for the ATX 24pin :

http://i54.tinypic.com/15i3oyv.jpg

BP fittings close-up :

http://i56.tinypic.com/ilkk69.jpg

The outcome of the atx24pin :

http://i53.tinypic.com/2mwaxs4.jpg

Inside of the ATX24pin :

http://i52.tinypic.com/11hsby9.jpg
http://i55.tinypic.com/2hncmbo.jpg

A Total overview with the motherboard and his power connectors installed for viewing cable routing :

http://i52.tinypic.com/2055rwj.jpg

CPU1 Close-up :

http://i55.tinypic.com/21l4zlx.jpg

CPU0 Close-up :

http://i51.tinypic.com/27zx8br.jpg

ATX 24pin close-up :

http://i55.tinypic.com/wkljdk.jpg

ATX 24pin Close-up while motherboard is plugged in :

http://i53.tinypic.com/23j4klx.jpg

Total View ATX24 pin :

http://i55.tinypic.com/24w7x5d.jpg

TOTAL overview mobo + atx connectors , alu plate :

http://i51.tinypic.com/m9sr5f.jpg

Working on the case again al day, bend the alu plate, making some acryl ready,
the extra piece of hight is for the cpu power cables of the left cpu :

http://i53.tinypic.com/crbzn.jpg

With the cooler on his place :

http://i55.tinypic.com/zvx8n7.jpg

With the red acryl on his place also for the enlargement of the mobo cover :

http://i51.tinypic.com/2qtfg4x.jpg

And then as last also grey smoke like on the cpu cooler left en on the vga's, is for breading room :

http://i55.tinypic.com/4rxnyt.jpg

http://i54.tinypic.com/20gdz0o.jpg

here are some new pics, with a little modification on case, and did some fine work :

http://i51.tinypic.com/f3uias.jpg
http://i53.tinypic.com/344trbs.jpg
http://i55.tinypic.com/10rlqfa.jpg
http://i55.tinypic.com/ifdicz.jpg
http://i51.tinypic.com/vsm444.jpg
http://i54.tinypic.com/2uhbus4.jpg

here are some pics of what i did today, it still needs some work offcourse.

But now you got an idea how i will do it :

http://i54.tinypic.com/2cxaxb7.jpg
http://i51.tinypic.com/fyzo6u.jpg
http://i51.tinypic.com/2ihar09.jpg
http://i51.tinypic.com/27ywjfl.jpg

http://i54.tinypic.com/20ped4y.jpg

http://i55.tinypic.com/30rv4sk.jpg

http://i53.tinypic.com/iyd0yo.jpg

i give the alu plate some more shape :

http://i51.tinypic.com/103zdbm.jpg
http://i56.tinypic.com/2cptbab.jpg

sanding, prime and paint the alu parts (if i'm up for it)

Now it's good visible what i whanted to do with the case to fit the bigger mobo SR-2 in this case (normally no fit lol)

Sorry for the bad pics, not enough light but i whanted to show you guys already what i did today :

http://i52.tinypic.com/2j3gshx.jpg
http://i56.tinypic.com/6xzzmv.jpg
http://i55.tinypic.com/w0kknd.jpg
http://i55.tinypic.com/312wgp2.jpg
http://i52.tinypic.com/2i93zlt.jpg
http://i56.tinypic.com/23u9dv7.jpg
http://i53.tinypic.com/1zb5hs9.jpg

Here are some better pics in daylight.

I didn't close the cover good, it's not that it has a space between it lol.

The parts have now there first primer coating :

http://i51.tinypic.com/jaavdt.jpg
http://i53.tinypic.com/2nle1id.jpg
http://i56.tinypic.com/2vay2w7.jpg


And here the first parts in primer, i sprayed it very thick,
because i nedd to get al the tiny flows sanded out of it, but will get more layers :

http://i51.tinypic.com/2en2kbk.jpg

primed en sanded, nog putting on the first layer of MAT black paint, only the pics sucks lol :

http://i54.tinypic.com/2w350cy.jpg
http://i56.tinypic.com/2ih9fo6.jpg

http://www.youtube.com/watch?v=A0RWZ514aoQ

the alu plate for the mobo cover is painted and mounted, here some pics of it :

http://i56.tinypic.com/24wr80o.jpg
http://i53.tinypic.com/9std3n.jpg
http://i51.tinypic.com/2mxlo4p.jpg
http://i53.tinypic.com/6omuxc.jpg

http://i51.tinypic.com/16j4p60.jpg

putting the isolation on the backplates of mobo, with the inox backplates :

http://i53.tinypic.com/2dgor45.jpg
http://i52.tinypic.com/2wdy4og.jpg

And this is how the case is on this moment, also fitted a 16x2 red/black lcd above the Boreas chiller.
Also you see now how hidden the ATX24pin really is, pure cable management with the 90° connectors :

http://i51.tinypic.com/rjkuwk.jpg
http://i52.tinypic.com/w191mo.jpg
http://i52.tinypic.com/2dub31u.jpg
http://i51.tinypic.com/1217cdu.jpg
http://i53.tinypic.com/105edqh.jpg
http://i51.tinypic.com/200xnoz.jpg
http://i56.tinypic.com/2qamqdl.jpg

Total overview of the case how he's now.
Most of the cables are on/in it : audio, usb, powerswitch, hdd led, power led, reset, reset led, debug lcd, 2 sata, all atx and pci kabels.

Evga PSU is also on his place together with the  dual bay psu in front  :

http://i52.tinypic.com/2hfqmj6.jpg

overview of mobo with all cables on it :

http://i55.tinypic.com/ivwqrr.jpg

Also i have made a cable for the EVbot connection in the mobo IO-Shield, so the connection will be in the front plate, where it's easier to acces to hook up the EVbot :

http://i51.tinypic.com/34yrbs0.jpg
http://i51.tinypic.com/r2m2s8.jpg

Total overview of the current cables in the case lols,
but they are not all the cables yet, and need also some controllers to put there
(coolit, koolance, poweruse) :

http://i54.tinypic.com/35n2g4w.jpg

New Armaflex lasercutted is in, and fits the SR-2 with waterblock perfectly :

http://i53.tinypic.com/25aueys.jpg
http://i56.tinypic.com/j8nz92.jpg

Here are some pics with all coolers on there place, now you see also why i make the 90° connectors on the mobo :

http://i55.tinypic.com/15817pk.jpg
http://i53.tinypic.com/scxocy.jpg

Here you see, with fittings and all, i calculated just enough space for cpu block etc :

http://i55.tinypic.com/24fco7a.jpg


and this is why i made those 90° connectors, so maximum on cable management :

http://i51.tinypic.com/2eultti.jpg

next layer of armaflex :

http://i56.tinypic.com/2j0ihkh.jpg

Cut-out for the waterblock :

http://i54.tinypic.com/a5j9fb.jpg
http://i52.tinypic.com/95y4wm.jpg

And also soldering some SMD-led's for in the case,
when you solder these smd-led's be shure you use Kynar whire, THE wire for working with SMD's :

http://i53.tinypic.com/243hkiw.jpg

And putting the smd-led's on place with double component epoxy :

http://i53.tinypic.com/m9stbs.jpg

Just like i put 320 smd-led's in previous casemod : Chiller's Evga Monsta :

http://i51.tinypic.com/2d84bp0.jpg
http://i56.tinypic.com/m1o1x.jpg

Jesus has nothing to do with it hahahaha

http://i54.tinypic.com/2u7atr9.jpg

http://i54.tinypic.com/mcq0hy.jpg
http://i52.tinypic.com/21kcfo0.jpg
http://i52.tinypic.com/zwcp3m.jpg
http://i54.tinypic.com/21sf8n.jpg
http://i54.tinypic.com/t9us0i.jpg

I cut up an Evga ECP Panel for building it in the front of my case.
little soldering, and i will have a EVbot connecting in front, a DEBUG lcd, Clear CMOS switch and switches for disable PciE and cpu's.

This will be build in a Lian-Li slim-drive Bracket where together with a slot-in dvd drive also can go two SSD harddrives in it :
i cut the ECP Panel up because you see always mods with just the ECP Panel screwed in the case, now i change this to my own taste.

http://i55.tinypic.com/jgm8tu.jpg

Here is the Lain-Li slim dvd drive bracket,
(bought in usa)

Here you see how i build in all the different switches, lcd en connectors, these will come behind a grey smoke acryl plate :

http://i54.tinypic.com/2ewh7gx.jpg

Clear CMOS with his tiny hole :

http://i51.tinypic.com/2hpjghk.jpg

Total overview of the case :

http://i52.tinypic.com/16byfs7.jpg

http://i53.tinypic.com/25islf4.jpg

http://i54.tinypic.com/25g4f3s.jpg

In the case it's still dark, but also on the graphics cards will come nice mods etc......:

http://i56.tinypic.com/142c8iu.jpg

http://i51.tinypic.com/98sqp3.jpg

http://i51.tinypic.com/2vhyk2v.jpg

http://i55.tinypic.com/v656wz.jpg

http://i53.tinypic.com/119w0vb.jpg

http://www.youtube.com/watch?v=szo-xs4Nkys

little update,

the Evga ECP Panel of Classified mobo's, i cut it in pieces,

http://i55.tinypic.com/jgm8tu.jpg

And this is what i did with those pieces, i only whanted to use the Clear CMOS button and the debug lcd,
also i enlarged the connectors in the IO-Shield of the Evga EVbot to the front plate for easy acces.
There still needs to come a slim dvd drive slot-in and a grey smoke front plate :

http://i52.tinypic.com/1z6cjyt.jpg
http://i53.tinypic.com/viegc2.jpg

have taken the front panel connector of my old intel skulltrail mobo (dremel in mobo)

http://i52.tinypic.com/svkufs.jpg

And used this connector in my slim drive bay of lian-li, together with the  ECP panel i cutted up,
so that i can hoop up the ECP panel cable of mobo in my dvd drive,and from here everything will be splitted to debug lcd, power and reset switches and cpu/PciE disabled switches

http://i56.tinypic.com/oh0n7o.jpg

and hhere you see it, connector for ECP panel connector that comes from mobo, and connector for power and reset switches :

http://i55.tinypic.com/6yz0io.jpg

also the halve of the cables is managed, have some more cables to do and connectors to solder.
Have also the Koolanc TMS-200 controller build-in the case and hooked up the first cables and sensors

some small packages arrive:

Sata slim line dvd RW drive :
http://i53.tinypic.com/2ik34w0.jpg

Sata slim drive adapter to normal sata :

http://i55.tinypic.com/154911w.jpg

adapter on it screwed :

http://i51.tinypic.com/315nxbs.jpg

red smd-led strips for some light inside the case :

http://i52.tinypic.com/zy7qt0.jpg

3x Nexus air-beamers for 80/92mm fans, also here comes a nice mod with in the case,
also some 3mm led's , 1 for the freezone V1 cooler, the other one is for in SB of Mobo full cover block instead of the stock blue led's :

http://i55.tinypic.com/sxgi1d.jpg

As you can see in 1 drive bay in my rig can hold more then 1 item , is multi functional :

Debug lcd
clear cmos
EVbot connector
disable cpu's/PciE's
HDD for extra space
and dvd drive itself

http://i52.tinypic.com/259zbq9.jpg

received my prize today, pics will say enough :

http://i52.tinypic.com/15k5fc.jpg
http://i52.tinypic.com/wv27nc.jpg

got new bolts in red alu, and switchen for disable pciE and cpu's

http://i51.tinypic.com/2ih2p2s.jpg

2 new cpu-blocks are on their way :

http://i54.tinypic.com/1ptfyv.jpg
http://i54.tinypic.com/207x6qg.jpg

i still needed a fan grill, but stock grills i didn't like :

http://i53.tinypic.com/25islf4.jpg

so i did this with an airguard grill :

http://i55.tinypic.com/34domf4.jpg

http://i55.tinypic.com/2ia756r.jpg

http://i53.tinypic.com/28hd5yt.jpg

i whanted first the disable PciE and cpu switchen what are jumpers on the evga ECP Panel in the front panel.
But i changed my mind, so nobody can fidle with them, i put them on the back of the dvd drive next to the connector of it.

http://i56.tinypic.com/wh09zq.jpg

drive bay is ready, now with the PciE and Cpu switchen on it.
ready to build in and make the front plate of grey smoke :

http://i55.tinypic.com/14ecbhh.jpg

drive bay is finished, now only makinjg the front plate, grey smoke acryl,

here you see the connectors for power power led reset and reset switch
cpu and pciE disable, ecp connector to mobo,

and in front the Evga EVbot connector, debug lcd and clear Cmos switch :

http://i51.tinypic.com/w2i0pl.jpg
http://i56.tinypic.com/120s9e9.jpg

Busy on the clean front plate of grey smoke acryl.
Now made the EVbot connector in place,
only the dvd cut-out and clear CMos and offcourse the drive bay PSU needs some fresh air to.
The outside needs to be finished at the end :

http://i51.tinypic.com/24gw22b.jpg
http://i54.tinypic.com/s66ag9.jpg

little update, pics say enough i think :

http://i52.tinypic.com/2qm13yd.jpg

http://i55.tinypic.com/23tjm74.jpg

here a little update of my front plate, only need to find a nice grid to put in there so it comes nice untill the front :

http://i53.tinypic.com/5bxt7l.jpg

Little update,

tomorrow big works on rig :

http://i56.tinypic.com/15eu6vc.jpg

http://i53.tinypic.com/2whf4ty.jpg

http://i56.tinypic.com/aafzps.jpg

http://i52.tinypic.com/a1mlq8.jpg

Coolingpaste is used : Liquid Ultra,
temp sensor by every cpu,
Adjust the mounting with red smoke acryl voor more pressure on armaflex and for visual effects,
start to cut also some tubing Norprene on size,

only waiting for next orders to arrive of tube clamps, 3mm red led's, and some more stuff.
The first triple kit memory is also ordered : Corsair Dominator GT 12Gb triple kit 2000Mhz CL9,
where there will come 4 kits on the mobo of these.

enjoy the pics :

http://i56.tinypic.com/2elxnk7.jpg

http://i52.tinypic.com/97lmw9.jpg

http://i55.tinypic.com/111ugly.jpg

http://i54.tinypic.com/33os6sw.jpg

here some show pics,the effect of the custom mounting is now nice visible,
while i'm busy with all the cable management :

http://i51.tinypic.com/fyock1.jpg

http://i53.tinypic.com/x3en0l.jpg

http://i52.tinypic.com/2i9ijxf.jpg

http://i52.tinypic.com/bdkzh3.jpg

http://www.youtube.com/watch?v=3LLuWvRMKQs

small update:


tubing is almost ready just need 3th pump, a koolance PMP-400 with acetal top,

and building a drainvavle beneath.

then it's all ready just need memory dom GT 2000Mhz 12gb Triple kits.

enjoy the pics because it's closing up this build, just few mods and it's ready :


http://i51.tinypic.com/2s1u1oy.jpg

http://i51.tinypic.com/2lsd1jm.jpg

http://i55.tinypic.com/2415nhz.jpg

http://i56.tinypic.com/23uvr6a.jpg

http://i53.tinypic.com/2ytu3d1.jpg

http://i51.tinypic.com/2e0jwjl.jpg

http://i53.tinypic.com/29ql644.jpg

http://i55.tinypic.com/2071gl0.jpg

http://i53.tinypic.com/2uqkjkn.jpg

http://www.youtube.com/watch?v=V-csoxDXp_0

what am i planning to do ?

http://i53.tinypic.com/vwtslx.jpg

the bottom is as good as finished,
just need to order a flat pump with top...
if a Koolanc PMP-400 pump with top is maximum 40mm heigh.

I can take the bottom out any time it's a tight fit and is on 2 alu plates, nice and steady.

The usb internal, sata and ECP connector on the mobo is nice clean now.
This is no metal plate but 4mm not shiny black acryl plate PMMA15

only needs to get connectors for the PciE powercables for the GPU's :

http://i52.tinypic.com/2cqmcfd.jpg

http://i55.tinypic.com/1okm55.jpg

http://i52.tinypic.com/znadeg.jpg

after the drain valve needs also a exit for the liquid :

http://i54.tinypic.com/5ewkg2.jpg

little update :

Make the led's for the full cover block on size to the fan connector on mobo what normally the fan is for the NB cooling.
Next i'm modding the powercables for the vga's :

http://i55.tinypic.com/34jcbk4.jpg
http://i54.tinypic.com/ojqmtj.jpg

i'm busy on a little mod for the memory, lasered alu, and some handwork, need base and color paint :

http://i52.tinypic.com/23mq2yv.jpg

http://i53.tinypic.com/2q0sp4g.jpg

new pic

http://i56.tinypic.com/a1slfp.jpg

Dernière modification par HybridChiller (2011-05-06 20:07:48)

Hors ligne

 

#2 2011-02-01 22:55:20

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

Je parle francais alors si vous avez des questions big_smile

Hors ligne

 

#3 2011-02-02 08:50:42

plasmatique
Moderator
Lieu: Villeurbanne France
Date d'inscription: 2007-06-07
Messages: 4184

Re: Chiller's HYbrid Cooled SR-2

Beau travail: ça donne quoi au niveau température?

Hors ligne

 

#4 2011-02-02 16:11:21

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

Salut

Ca devrait donnez du -10 voir moins

Pour du h24 c'est super big_smile

Hors ligne

 

#5 2011-02-04 00:49:29

Xsat
OCX Member
Lieu: Hornu ( Mons )
Date d'inscription: 2008-06-12
Messages: 3014

Re: Chiller's HYbrid Cooled SR-2

putain ... c'est énorme ton boulot, j'adore !


En pleine MAJ de ma config, ça donne ça:
GTX580 Lightning + i3 550... Cherchez l'erreur!

Hors ligne

 

#6 2011-02-04 13:10:37

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

merci

Hors ligne

 

#7 2011-02-07 10:03:11

viktor
OCX Member
Lieu: Grenoble
Date d'inscription: 2009-05-27
Messages: 671

Re: Chiller's HYbrid Cooled SR-2

ca fait réver tout ça ...

je serais curieux de voir la config en ordre de marche smile


[email protected] | IFX-14 - 2xFM122 sans HR-10 | P5Q premium | 2x2Go G.Skill Ripjaws PC2-9600 | 4870 1Go + 4870 512 | HX850 | Sharkoon Rebel12 Value - mod. "et si on faisait de la circulation d'air ?"

Hors ligne

 

#8 2011-02-07 11:44:54

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

http://i54.tinypic.com/rjfk95.jpg

Dernière modification par HybridChiller (2011-02-07 11:46:36)

Hors ligne

 

#9 2011-02-07 13:43:04

viktor
OCX Member
Lieu: Grenoble
Date d'inscription: 2009-05-27
Messages: 671

Re: Chiller's HYbrid Cooled SR-2

question à la con , tu utilise quoi comme peinture pour l'alu ?


[email protected] | IFX-14 - 2xFM122 sans HR-10 | P5Q premium | 2x2Go G.Skill Ripjaws PC2-9600 | 4870 1Go + 4870 512 | HX850 | Sharkoon Rebel12 Value - mod. "et si on faisait de la circulation d'air ?"

Hors ligne

 

#10 2011-02-07 16:37:24

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

google translate : amorce résistant à la chaleur suivie de peinture rouge résistant à la chaleur

Hors ligne

 

#11 2011-02-07 17:59:46

GT3148
OCX Member
Lieu: wandre (liege)
Date d'inscription: 2007-11-19
Messages: 2553
Site web

Re: Chiller's HYbrid Cooled SR-2

viktor a écrit:

question à la con , tu utilise quoi comme peinture pour l'alu ?

Salut
je dirais de la peinture en bombe pour frein ou moteur

Dernière modification par GT3148 (2011-02-07 18:00:17)

Hors ligne

 

#12 2011-02-09 09:06:37

viktor
OCX Member
Lieu: Grenoble
Date d'inscription: 2009-05-27
Messages: 671

Re: Chiller's HYbrid Cooled SR-2

HybridChiller a écrit:

google translate : amorce résistant à la chaleur suivie de peinture rouge résistant à la chaleur

au temps pour moi, je n'avais pas vu que tu en parlais déjà dans ton worklog :x


[email protected] | IFX-14 - 2xFM122 sans HR-10 | P5Q premium | 2x2Go G.Skill Ripjaws PC2-9600 | 4870 1Go + 4870 512 | HX850 | Sharkoon Rebel12 Value - mod. "et si on faisait de la circulation d'air ?"

Hors ligne

 

#13 2011-02-09 18:43:54

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

better pic of GT mod :

http://i53.tinypic.com/nzreph.jpg

and new stuff sponsort by aquatuning  :

http://i54.tinypic.com/2pqq068.jpg

Hors ligne

 

#14 2011-02-15 13:21:47

Catatao
OCX Member
Lieu: Rennes
Date d'inscription: 2010-09-21
Messages: 57
Site web

Re: Chiller's HYbrid Cooled SR-2

Salut!
Respect, travail incroyable et super réussi!!!
Petite curiosité quand même, quelle carte graphique dans l'ensemble et quels processeurs?

Salut smile


2500K stock Vcore 1.1V  + H50 Push&Pull SilentWings 120 / 8go Ripjaws 1333 Cas9 / MSI P67A-G45 / 1To + Phoenix pro 120 / XFX 6950 @6970 + Prolimatech MK13 passif / Corsair AX750W / Morex AL-169 moddé

Hors ligne

 

#15 2011-02-15 16:21:34

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

3x Evga GTX580 superclocked

cpu : 2x X5550

hdd : RevodriveX2 240Gb

Hors ligne

 

#16 2011-02-17 14:21:19

Catatao
OCX Member
Lieu: Rennes
Date d'inscription: 2010-09-21
Messages: 57
Site web

Re: Chiller's HYbrid Cooled SR-2

La config qui va bien avec big_smile !

Bon, avec ça je pense que tu ne dois pas avoir trop de problèmes à démarrer ton OS tongue

Ca donne quoi pour les températures en charge (pas très élevé je sais)?


2500K stock Vcore 1.1V  + H50 Push&Pull SilentWings 120 / 8go Ripjaws 1333 Cas9 / MSI P67A-G45 / 1To + Phoenix pro 120 / XFX 6950 @6970 + Prolimatech MK13 passif / Corsair AX750W / Morex AL-169 moddé

Hors ligne

 

#17 2011-02-17 20:42:48

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

Elle ne marche pas encore la config manque 2 trois chose

Sinon ca devrait etre du negative comme temperature big_smile vers -10 -15 voir moins meme

Hors ligne

 

#18 2011-02-18 00:25:33

Catatao
OCX Member
Lieu: Rennes
Date d'inscription: 2010-09-21
Messages: 57
Site web

Re: Chiller's HYbrid Cooled SR-2

Le bonheur big_smile !!!!!!!
Et dire que j'étais content de voir mes deux HD5770 à 48°c en full lol

Dernière modification par Catatao (2011-02-18 00:26:53)


2500K stock Vcore 1.1V  + H50 Push&Pull SilentWings 120 / 8go Ripjaws 1333 Cas9 / MSI P67A-G45 / 1To + Phoenix pro 120 / XFX 6950 @6970 + Prolimatech MK13 passif / Corsair AX750W / Morex AL-169 moddé

Hors ligne

 

#19 2011-02-27 00:38:59

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

today had some fun to make some more Dominator GT flames for my memory :

http://i51.tinypic.com/212e0sx.jpg

Hors ligne

 

#20 2011-02-27 11:48:26

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

update :

http://i51.tinypic.com/dqsksz.jpg

Hors ligne

 

#21 2011-02-27 13:53:25

GT3148
OCX Member
Lieu: wandre (liege)
Date d'inscription: 2007-11-19
Messages: 2553
Site web

Re: Chiller's HYbrid Cooled SR-2

Class  wink

Hors ligne

 

#22 2011-03-09 19:10:11

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

small update, got at last the snake connector in, so the 3th pump can be fitted and the loop closed,
ready to fill it up.

left of the pump you see all kind of cables , that's for the Koolanc TMS-200 controller, all kinds of temp sensors all around the mobo and cpu's.

http://i54.tinypic.com/4toa69.jpg

Hors ligne

 

#23 2011-03-10 20:53:48

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Re: Chiller's HYbrid Cooled SR-2

i'm going to fill up the loop now the 3th pump is installed,  own mixture : 25% Ethylene Glycol and 75% PURE water, no demi.

what you see in the measure cup is the Glycol no color pure 100% glycol :

http://i55.tinypic.com/54zmth.jpg

here my koolanc poor in cup on the  ZERN res with a snake connector to make it a little bit eassier to fill  :

http://i51.tinypic.com/5mwk82.jpg

on the drain valve i putted also a tube in a bus filled with my mixture, where the pump can draw it's liquid from when i put the valve open, to make it a little bit eassier to lol :

http://i52.tinypic.com/35d8gw9.jpg

http://i54.tinypic.com/2zgheld.jpg

and here comes the first liquid lol, pumps are now running to get the last micro bubbles out the loop, for now, no leaks found  :

http://i55.tinypic.com/2r4n18p.jpg

Hors ligne

 

#24 2011-03-11 17:00:22

HybridChiller
New member
Date d'inscription: 2011-02-01
Messages: 41

Hors ligne

 

#25 2011-03-11 20:34:28

GT3148
OCX Member
Lieu: wandre (liege)
Date d'inscription: 2007-11-19
Messages: 2553
Site web

Re: Chiller's HYbrid Cooled SR-2

whoaaaaaaaaaaa  wink

Hors ligne

 
  • Pied de page des forums

    Propulsé par FluxBB
    Traduction par FluxBB.fr